Секция 2 из 2 - Предыдущая - Следующая
DayOfWeekDMY Day of the week for the day, month, year
DayOfWeekToString Returns the name of the day of the week
DaysInMonth Returns number of days in specified month
DecTime Decreases time by a specified amount
DMYToDateString Converts day, month, and year to date string
DMYToStDate Converts day, month, and year to TStDate
HMSToStTime Converts hours, minutes, seconds to TStTime
IncDate Adjusts a date by the specified number of days,
months and years
IncDateTime Adjusts a date and time by the specified number of
days and seconds
IncDateTrunc Adjusts a date the specified number of months and years
IncTime Increases time by a specified amount
InternationalDate Returns a picture mask for the Windows short date
string
InternationalLongDate Returns a picture mask for the Windows long date string
InternationalTime Returns a picture mask for the Windows time string.
IsLeapYear Checks if given year is a leap year
MonthToString Returns name of given month
RoundToNearestHour Rounds a time to the nearest hour
RoundToNearestMinute Rounds a time to the nearest minute
StDateToDateString Converts a TStDate to a date string
StDateToDateTime Converts a TStDate to a Delphi TDateTime
StDateToDMY Converts a TStDate to day, month, and year
StTimeToDateTime Converts a TStTime to a Delphi TDateTime
StTimetoHMS Converts a TStTime to hours, minutes, and seconds
StTimeToTimeString Converts a TStTime to a time string
TimeDiff Returns the absolute difference between two times
TimeStringToHMS Converts a time string to hours, minutes, and seconds
TimeStringToStTime Converts a time string to a TStTime
ValidDate Checks if a given date is valid
ValidTime Checks if a given time is valid
WeekOfYear Returns the week number for a specified date
Systools - Low-level Procedures/Functions
AddWordToPtr Adds a word to a pointer
ByteFlagIsSet Checks if a bit is set in a byte
ClearByteFlag Clears one or more bits in a byte
ClearFlag Clears one or more bits in a word
ClearLongFlag Clears one or more bits in a long integer
CopyFile Copies a file to another
DateTimeToStDate Converts a Delphi TDateTime to an StDate
DateTimeToStTime Converts a Delphi TDateTime to an StTime
DeleteVolumeLabel Removes the volume label from a disk
EnumerateDirectories Lists directories on a drive or disc
EnumerateFiles List directories and files on a drive or disc
ExchangeBytes Swaps the values in two byte variables
ExchangeLongInts Swaps the values in two long integer variables
ExchangeStructs Swaps the values in two structures
ExchangeWords Swaps the values in two word variables
FileHandlesLeft Returns the number of file handles available
FileTimeToStDateTime Converts a DOS date-time to an StDateTime record
FillStruct Fills a structure with a given variable-sized value
FillWord Fills a structure with a given word-sized value
FlagIsSet Checks if a bit is set in a word
FlushOsBuffers Flushes the file buffers
GetDiskClass Returns the class of a specified drive
GetDiskInfo Returns information on the specified drive
GetMediaID Returns information on the specified drive
IsDirectory Checks if a string refers to a directory
IsDirectoryEmpty Checks if a directory has files or subdirectories
IsFileArchive Checks if a file's archive attribute is set
IsFileHidden Checks if a file's hiddent attribute is set
IsFileReadOnly Checks if a file's read-only attribute is set
IsFileSystem Checks if a file's system attribute is set
LongFlagIsSet Checks if a bit is set in a long integer
MakeInteger16 Creates a two-byte integer from two bytes
MakeWord Creates a word from two bytes
MaxFloat Returns the greater of two floating point numbers
MaxLong Returns the greater of two long integers
MaxWord Returns the greater of two words
MidFloat Returns the middle value of three floating point
numbers
MidLong Returns the middle value of three long integer numbers
MidWord Returns the middle value of three words
MinFloat Returns the lesser of two floating point numbers
MinLong Returns the lesser of two long integer
MinWord Returns the lesser of two words
ReadVolumeLabel Returns the volume lable for the specified drive
SameFile Checks if two path names refer to the same physical
file
SetByteFlag Sets a bit in a byte
SetFlag Sets a bit in a word
SetLongFlag Sets a bit in a long integer
SetMediaID Sets the media ID information for the specified drive
SignF Returns an integer based on whether a floating point
value is <0, =0,or >0
SignL Returns an integer based on whether an integer value
is <0, =0,or >0
StDateToDateTime Converts an StDate to a Delphi TDateTime
StTimeToDateTime Converts an StTime to a Delphi TDateTime
StDateTimeToFileTime Converts an StDateTime record to DOS date-time
SwapNibble Swaps the high and low bits in a byte
SwapWord Swaps the high and low bytes in a word
ValidDrive Checks if the specified drive is valid
WriteVolumeLabel Writes the volume label to the specified drive
Systools - Container Classes
TStBits
TStCollection
TStContainer
TStDictionary
TStDQue
TStHashTable
TStLArray
TStList
TStLMatrix
TStSortedCollection
TStTree
TStVMatrix
Systools - TStSorter Class
SysTools - Registry and INI File Basics (TStRegIni)
SysTools - BCD Math
AbsBcd Returns the absolute value of a BCD number
AddBcd Sums two BCD variables
BcdExt Converts a BCD number to an extended number
CmpBcd Compares two BCD numbers
ConvertBcd Resizes a BCD number
DivBcd Divides a BCD number by another
EqDigitsBcd Compares two BCD numbers after rounding to the specified
number of digits
EqPlacesBcd Compares two BCD numbers after rounding to the specified
number of places
ExpBcd Raises e (= 2.718281828459...) to the specified power
ExtBcd Converts an extended value to a BCD number
FloatFormBcd Converts a BCD number to a string in the specified format
FormatBcd Converts a BCD number to a string in the specified format
FracBcd Returns the fractional part of a BCD number
IntBcd Returns the integer part of a BCD number
IntPowBcd Raises a BCD number to the specified integer power
IsIntBcd Checks if a BCD number has a fractional part
LnBcd Returns the natural (base e) logarithm of a BCD number
LongBcd Converts a long integer to a BCD number
MulBcd Returns the product of two BCD numbers
NegBcd Reverses the sign of a BCD number
PowBcd Raises a BCD number to the specified power
RoundBcd Rounds a BCD to the nearest integer and returns a long integer
RoundDigitsBcd Returns a BCD number with a specified number of significant
digits
RoundPlacesBcd Rounds a BCD number to the specified number of decimal places
SqrtBcd Returns the square root of a BCD number
StrBcd Converts a BCD number to a string in floating point format
StrExpBcd Converts a BCD value to a string in scientific notation
StrGeneralBcd Converts a BCD number to a string
SubBcd Subtracts one BCD value from another
TruncBcd Truncates a BCD number and returns a long integer
ValBcd Converts a string to a BCD number
SysTools - String resource manager
-------------------------------------------------------------------------------
From : Yrik Meiz <yrik(at)pika.stel.sebastopol.ua> 20 Oct 98 13:59:06
Venus & ArdaSoft & Genesis
1. Небольшая библиотека Venus.
Указанная библиотека служит для оформительских целей:
- есть форма(наследник TForm), которая обеспечивате переход по ENTER,
между компонентами;
- компонент ToxForm - бросаешь его на форму и добавляются возможности
- редактирование вида заголовка (фонты, цвета и т.д.);
- на заголоыке формы появляется 4 (четыре) новых кнопки, на которые
можно определить свои действия;
- есть еще дополнительные свойства по настройке вида формы.
- компоненты ToxGraphicButton и ToxButton - это кнопки дляя которых
определяются картинки на события UP, DOWN, DISABLE с возможностью
разменщения их в нужных координатах (относительно кнопки есть свойства
для задания смещения X и Y), и чего-то у них там есть еще.
2. Библиотека ArdaSoft - которая состоит из:
- TCharLed - сегментного индикатора (отображает все цифры
и некоторые буквы)
- TDBPaker - упаковка всех баз указанных в свойстве DATABASE;
- TNetInfo, TPCInfo, TSysInfo - для чего дкмаю понятно;
- TDigitalCloc - сегментные часы на компоненте TCharLed
3. Библиотека Genesis для работы с БД, состоящая из:
Components ( Data-aware )
TcsDBIntelliGrid немного измененный DBGrid
TcsDBSearchEdit Edit с возможностью поиска
TcsDBSortCombo
TcsDBNavigator
TcsDBValidator
TcsDBFieldBox
TcsDBDataDoctor
TcsDBTableBackup
TcsDBDateTimeCombo
TcsDBDateTimePanel
TcsDBTimeCombo
TcsDBCalculatorCombo
TcsDBCodeLookupCombo
TcsDBLookupCombo
TcsDBLookupList
TcsDBRecordPrinter
TcsDBLookupDialog
TcsDBMemoDialog
TcsDBImageDialog
TcsDBLookupEdit
Components ( Non data-aware )
TcsAntiVirus
TcsDateTimeCombo
TcsDateTimePanel
TcsTimeCombo
TcsCalculatorCombo
Objects
TcsDBGrid
TcsPrinter
TcsDropDownControl
TcsDropDownBox
TcsPopupControl
Functions
IsNumber
Trim
DatabaseExists
TableExists
CommaText
Procedures
GetDataBoundControls
WaitX
Описывать долго, думаю из названия компонент кое-что понятно.
-------------------------------------------------------------------------------
Секция 2 из 2 - Предыдущая - Следующая
© faqs.org.ru
